When your oven fails, how should you maintain it? As a baking oven supplier, I'd like to introduce it to you.

                                            Convection Oven

The Indicator Light Does not Light Up and Does not Heat Up

The indicator light does not light and does not heat is a very common small household oven failure, the treatment method is as follows:

1. Confirm whether the power supply panel is normally powered;

2. Confirm whether the circuit components are damaged, if damaged, contact the maintenance center;

3. Confirm whether the heating has been completed, because the oven will automatically stop working after heating to the set time;

4. Confirm whether the timing is correct. Most ovens do not work without setting the timing.

The Indicator Light is on But Not Heating

When the indicator light is on, the electric oven does not heat up mostly because of the following reasons:

1. Check the temperature setting of the oven, if it is because the temperature setting is too low, please reset the temperature;

2. Check whether the heating control (thermostat) has tripped because the heating has reached the set temperature;

3. After the above two points are eliminated, the cause of the heating element damage is suspected, please contact the repair center to replace the heating element.

If you find that your food takes longer to cook than it should, or is undercooked when it comes out of the oven, your oven may not reach the desired temperature. There may be several different reasons for this.

The Oven Has an Abnormal Smell

When the electric oven is found to have a peculiar smell, it should be inspected and dealt with in the following three steps:

1. Check that the oven is free of oil stains and food residues, and whether it needs to be cleaned;

2. Check whether the electric oven is placed with items that are easy to emit odors when it is working;

3. If there is no problem with the above two points, please check whether the circuit part is damaged. If necessary, it must be repaired immediately.

Timer Failed

Generally, the timer of the electric oven fails in two situations: one is that the timer is not allowed to enter; the other is that the timer does not return after setting. When encountering a timer failure, you should be careful not to open the box itself for maintenance, because the timer of an electric oven is a relatively complicated controller, and it is difficult to troubleshoot the fault without considerable experience and professional maintenance tools, so when a phase electric oven When the timer fails, it is recommended to stop using it and send it to a professional repair center for troubleshooting.

Uneven Baking

You should check the heating element and temperature sensor first.

Preheat the oven and perform a quick visual test to see if the heating element is completely red, and check if the resistance of the temperature sensor rises as the oven temperature increases. If any of them

Not Heated to the Correct Temperature

If the temperature sensor in the oven does not work as expected, it may cause the oven to fail to heat to the correct temperature. This may be caused by a faulty temperature sensor or a temperature sensor touching the oven wall.

Make sure the temperature sensor is not touching the inside wall, as this will affect its ability to accurately measure the internal temperature of the oven. If it is, reposition it so that it's not making contact with the wall. If it's still not heating correctly , you can use an ohmmeter to test that the sensor is working. The resistance of the sensor should rise with internal temperature of the oven. Like with a heating element or gas igniter, replacing the temperature sensor is a quick and easy fix you can do yourself.

If it still does not heat to the correct temperature and you have checked or replaced the heating element, gas igniter, and temperature sensor, you may only need to calibrate it.

Our company has the baking oven in high quality; if you want to learn more about our products, please contact us.